Browsed by
Day: January 17, 2019

DR-SONIC ENGINEERING CO., LTD. VIETNAM

DR-SONIC ENGINEERING CO., LTD. VIETNAM

VPM – Máy sàng bột siêu mịn

VPF – PHARMA

VPM – Máy sàng bột siêu mịn

Dòng sản phẩm VPM được cung cấp ở nhiều kích cỡ, 900 milimet, 1200 milimet, 1500 milimet, và toàn bộ các sản phẩm này có thể có một, hai hoặc ba sàn để cho phép cắt ở nhiều kích cỡ. Những chiếc máy sàng rung với công suất cao này thường được sử dụng trong sàng lọc và phân loại các loại bột rất mịn hoặc có kích cỡ nguyên tử (xuống tới 30 micron) và vật liệu rắn ở những thông lượng lớn.

Thiết kế: VPM-900, VPM-1200, VPM-1500, VPM-2000

Đặc tính thiết kế:
– Băng trên hình trụ.
– Có sẵn với sàn đơn và sàn kép.
– Hệ thống kẹp vòng và kẹp dây có thể mở nhanh.
– Toàn bộ các bộ phận tiếp xúc được làm từ thép không gỉ AISI 304.
– Giá đỡ cố định với tùy chọn gắn trên bánh xe.
– Thiết kế đáy nghiêng để đạt công suất lớn.
– Động cơ tiêu chuẩn 1,500 vòng trên phút, IP65.
– Đạt chứng nhận ATEX và FDA phê duyệt.
– Hệ thống vệ sinh mắt lưới tự động từ sóng siêu âm hoặc hệ thống vệ sinh bằng bóng (ở cấp độ thực phẩm và phi thực phẩm)

Ứng dụng:
– Sử dụng trong phân loại bột và các sản phẩm hạt cần được sàng lọc ở công suất lớn và nhiều kích cỡ hạt khác nhau.

Ưu điểm:
– Hiệu quả cao.
– Sàng lọc chính xác nhờ vào mắt lưới vuông
– Sàng lọc ở nhiều kích cỡ.
– Xả thải nhanh, dẫn tới công suất lớn hơn và tăng tuổi thọ của lưới sàng.
– Độ tin cậy cao nhờ vào kết cấu chắc chắn.
– Phát ra tiếng ồn ở mức độ thấp.
– Động cơ rung với 2 năm bảo hành.

Lĩnh vực ứng dụng:
–  Đồ ăn và đồ uống
–  Dầu thô, mỏ và khoáng sản
– Hóa chất và nhựa
– Vật liệu phủ
– Nông nghiệp
– Các loại bột kim loại
– Gốm sứ
– Rác thải và tái chế
– Tổng hợp & xây dựng

VPM line is offered at sizes of 900 mm, 1200 mm, 1500 mm and 2000 mm, all of which can have one, two or three decks to enable multiple cut sizes. These high capacity vibrating sieve machines are most commonly used  for screening and  separation of very fine or atomised powders (down to 30 micron) and solid materials at high throughputs.

Models: VPM-900, VPM-1200, VPM-1500, VPM-2000

Design characteristics:
–  Cylindrical upper band
–  Available with single or multiple decks
–  Ring clamping system or quick-release band clamps
–  All contact parts in AISI 304 stainless steel
–  Fixed base with an option to mount on wheels
–  Sloped bottom to achieve high capacity
–  Standard motor 1,500 RPM, IP65
–  FDA-approved and ATEX certified
–  Automatic mesh cleaning system such as ultrasonic
or ball cleaning systems (food and non–food grade).

Use:

–  Selection of powders and granulated products needing to be
screened at a high capacity and multiple cut points.

Advantages:

–  High efficiency

–  Precision screening due to square-mesh

–  Screening at multiple cut points

–  Fast waste discharge, leading to greater capacity
and high lifetime of the mesh
–  High reliability due to its solid structure

–  Emits low noise

–  Vibrating motor with 2 years warranty.

Industries:

–  Food & Beverages

–  Oil, Mining & Minerals

–  Chemicals & Plastics

–  Coatings

–  Agriculture

–  Metal Powders

–  Ceramics

–  Waste & Recycling

–  Aggregates & Construction.


DR SONIC


DR-SONIC ENGINEERING CO., LTD.
CÔNG TY TRÁCH NHIỆM HỮU HẠN KỸ THUẬT DR-SONIC
VỀ CHÚNG TÔI
Công ty trách nhiệm hữu hạn kĩ thuật DR-Sonic là nhà cung cấp thiết bị máy móc công nghiệp với khả năng đáp ứng toàn bộ nhu cầu máy móc trong sản xuất hiện đại. Công ty của chúng tôi cũng cung cấp Công nghệ sóng siêu âm tại cả Thái Lan và quốc tế. Mục tiêu của chúng tôi là đưa tới cho khách hàng những máy móc chất lượng cao (sản xuất tại Châu Âu) ở các mức giá cạnh tranh.
Chúng tôi chuyên về máy móc công nghiệp đồ ăn và đồ uống, công nghiệp ô tô, công nghiệp nhựa, công nghiệp dệt, công nghiệp bột, công nghiệp thiết bị y tế, công nghiệp mỹ phẩm, đóng gói và hầu hết các máy móc công nghiệp tổng hợp.
Chúng tôi cũng cung cấp các dịch vụ tại chỗ chất lượng cao, có thể xử lý các sự cố với phụ tùng luôn luôn sẵn sàng.
Với một loạt các sản phẩm được cung cấp bởi DR-Sonic, chúng tôi có thể đưa ra hệ thống phù hợp và thích nghi với hầu hết các ứng dụng/ngành.
Công ty trách nhiệm hữu hạn kỹ thuật DR-Sonic được thành lập năm 2008 với tổng số vốn điều lệ 10 triệu baht. Công ty trách nhiệm hữu hạn kỹ thuật DR-Sonic ra đời để đáp ứng các nhu cầu trong sản xuất hiện đại. Mục tiêu của chúng tôi là cung cấp cho khách hàng các máy móc chất lượng cao với giá cả cạnh tranh. Chúng tôi cũng cung cấp dịch vụ tại chỗ để xử lý các sự cố, với các phụ tùng thay thế luôn sẵn sàng.

DR-Sonic Engineering Co., Ltd. is an Industrial Machinery / Equipments supplier that is capable of meeting all machinery demands of modern day manufacturing. Our company also offers Ultrasonic Technology in Thailand and overseas. Our aim is to provide our customers with high quality machines (manufactured in Europe) at competitive prices.
We specialize in Food & Beverage Industry, Automotive Industry, Plastic Industry, Textile Industry, Powder Industry, Medical Device Industry, Cosmetics Industry, Packaging Industry and most general Industrial Machinery.
We also provide quality on-site serving that can deal with your trouble shooting problems with spare parts readily available.
With a wide range of products offered by DR-Sonic, we can offer the most apt and suitable system for almost any application / field.

DR-Sonic Engineering Co., Ltd. was established in 2008 with registered capital of 10 Million Baht. DR-Sonic Engineering Co., Ltd. is founded to meet the demands of modern day manufacturing. Our aim is to provide our customers with High Quality Machines at competitive prices. We also provide Quality Onsite Servicing that can deal with your troubleshooting problems, with spare parts readily available.

 

CONTACT US 

Address
10, PRAWIT LAE PHUAN SOI 16 BANGCHAK, PRAKHANONG BANGKOK 10260, THAILAND
Phone
+66 2746 1869, +66 81 735 5453
E-mail
am.drsonic@gmail.com
Website
drsonic.aecgateway.com, www.drsonics.com

 

 

DR-SONIC ENGINEERING CO., LTD. Myanmar

DR-SONIC ENGINEERING CO., LTD. Myanmar

VPM – အမွဳန္႔ သန္႔စင္စက္

VPM – VERY FINE POWDER

VPM - အမွဳန္႔ သန္႔စင္စက္
VPM – အမွဳန္႔ သန္႔စင္စက္
“VPM ျဖတ္ေတာက္မည့္ အဆင့္မ်ား တစ္ဆင့္၊ ႏွစ္ဆင့္၊ သံုးဆင့္အေပၚမူတည္၍ VPM ၏အရြယိအစားကို ၉၀၀ မမ၊ ၁၂၀၀ မမ၊ ၁၅၀၀မမ ႏွင္ ၂၀၀၀ မမ အထိ ရ႐ွိႏုိင္ပါသည္။ ထိုဝင္ဆန္႔ႏိုင္မႈျမင့္မားေသာ VPM စနစ္ကို ၃၀မိုက္ခ႐ိုအထိ ႐ွိေသာ
သန့္စင္ေနေသာ သိုမဟုတ္ အလြန္ေသးငယ္ေသာေပါင္ဒါမႈန္႔မ်ား ႏွင့္ သတၱုအစိုင္ခဲမ်ား စကင္ျပဳလုပ္ျခင္း ႏွင့္ ခြဲျခမ္းစိတ္ျဖာျခင္းတြင္အသံုးျပဳသည္။

ေမာ္ဒယ္: VPM-900, VPM-1200, VPM-1500, VPM-2000
ဒီဇိုင္း အသြင္အျပင္ပံုစံ
–       ထုလံုးရွည္ပံု အေပါ္ပိုင္း အကြင္း
–       အဆင့္တစ္ဆင့္တည္းသို႔မဟုတ္ အဆင့္မ်ားစြာျဖင့္လဲရရွိနိုင္ပါသည္၊
–       စက္ဝိုင္းပံုခ်ဳပ္ သို႔မဟုတ္ လ်င္ျမန္စြာလုပ္ေဆာင္ႏိုင္ေသာ အရစ္ပါခ်ဳပ္မ်ား
–       ဆက္စပ္ေနေသာအစိတ္ပိုင္းအားလံုးကို AISI304အဆင့္႐ွိ သံေခ်းမတက္ေသာသံမဏိျဖင့္ျပဳလုပ္ထားပါသည္။
–       ပံုေသအေျခခံ ေရြးခ်ယ္စရာ ဘီးအေပၚ ေမာင္တ့္(mount)
–       ေလ်ာေစာက္ပံုေအာက္ေျခေၾကာင့္ ပမာဏမ်ားမ်ားဝင့္ဆံပါသည္။
–       ၁၅၀၀RPM၊ IP65အဆင့္႐ွိ ေမာ္တာ
–       FDAေထာက္ခံခ်က္ႏွင့္ ATEX အသိမွတ္ျပဳလက္မွတ္ရ႐ွိၿပီး။
Ultrasonic စနစ္ သို႔မဟုတ္ အလံုး သန္႔စင္စနစ္(food and non food အဆင့္)ကဲ့သို႔ ေအာ္တို႔ဇကာသန္႔စင္စနစ္
အသံုးျပဳ
–       ေရြးခ်ယ္ထားေသာေပါင္ဒါမ်ားႏွင့္ အေစ့ ထုတ္ကုန္မ်ားအတြက္လိုအပ္ေစာစကင္စနစ္ (ႀကီးမားေသာပမာဏ၊ အမ်ိဳးမ်ိဳးေသာ ျဖတ္ပြိဳင့္မ်ား)
အားသာခ်က္မ်ား
–       စြမ္းေဆာင္ရည္ျမင့္မားသည္
–       ေလးေထာင္ပံုဇကာသန့္စင္စနစ္ေျကာင့္ စကင္ျပဳလုပ္ရာတြင္တိက်မႈ႐ွိသည္။
–       မ်ားစြာေသာ ျဖတ္ ပြိဳင့္မ်ားအတြက္စကင္စနစ္
–       လ်င္ျမန္ေသာ  High efficiency အညစ္ေၾကးစြန္႔ပစ္စနစ္၊ မ်ားျပားေသာ ဝင့္ဆံႏိုင္စြမ္း ႏွင့္ ၾကာ႐ွည္ခံေသာ ဇကာသက္တမ္း။
–       ေကာင္းမြန္စြာတည္ေဆာက္ထားေသာကိုယ္ထည့္ေၾကာင့္ ယံုၾကည္စိတ္ခ်စြာအသံုးျပဳႏိုင္ပါသည္။
–       ဆူညံသံနည္းပါးပါသည္။
–       ၂ႏွစ္အာမခံပါေသာ တုန္ခါေမာ္တာ
အသံုးျပဳေသာနယ္ပယ္မ်ား
–  စားေသာက္ကုန္ လုပ္ငန္း
–  ေရနံ၊ သတၱဳ နွင့္ တြင္းထြက္ပစၥည္းလုပ္ငန္း
–  ဓာတုပစၥည္းမ်ားနွင့္ ပလက္စတစ္လုပ္ငန္း
–  သုတ္ေဆးလုပ္ငန္း
–  စိုက္ပ်ိဳးေရးလုပ္ငန္း
–  လုပ္ငန္းသံုး သတၱဳမွဳန္႕ လုပ္ငန္း
–  ေႂကြထည့္လုပ္ငန္း
–  စြန္႔ပစ္ပစၥည္းမ်ားျပန္လည္သန္႔စင္ျခင္းလုပ္ငန္း
–  ေဆာက္လုပ္ေရးလုပ္ငန္း

VPM line is offered at sizes of 900 mm, 1200 mm, 1500 mm and 2000 mm, all of which can have one, two or three decks to enable multiple cut sizes. These high capacity vibrating sieve machines are most commonly used  for screening and  separation of very fine or atomised powders (down to 30 micron) and solid materials at high throughputs.

Models: VPM-900, VPM-1200, VPM-1500, VPM-2000

Design characteristics:
–  Cylindrical upper band
–  Available with single or multiple decks
–  Ring clamping system or quick-release band clamps
–  All contact parts in AISI 304 stainless steel
–  Fixed base with an option to mount on wheels
–  Sloped bottom to achieve high capacity
–  Standard motor 1,500 RPM, IP65
–  FDA-approved and ATEX certified
–  Automatic mesh cleaning system such as ultrasonic
or ball cleaning systems (food and non–food grade).

Use:

–  Selection of powders and granulated products needing to be
screened at a high capacity and multiple cut points.

Advantages:

–  High efficiency

–  Precision screening due to square-mesh

–  Screening at multiple cut points

–  Fast waste discharge, leading to greater capacity
and high lifetime of the mesh
–  High reliability due to its solid structure

–  Emits low noise

–  Vibrating motor with 2 years warranty.

Industries:

–  Food & Beverages

–  Oil, Mining & Minerals

–  Chemicals & Plastics

–  Coatings

–  Agriculture

–  Metal Powders

–  Ceramics

–  Waste & Recycling

–  Aggregates & Construction.



dr sonic

DR-SONIC ENGINEERING CO., LTD.
ABOUT US
DR- Sonic Engineering Co., Ltd ယေန့ေခတ္ ထုတ္လုပ္ေရးလုပ္ငန္းမ်ားအတြက္ စက္ရံုလုပ္ငန္းသံုး စက္ပစၥည္းမ်ားနွင့္ အပိုပစၥည္းမ်ားကိုထုတ္လုပ္ေထာက္ပံေပးေနေသာ ကုမၸဏီ တခုျဖစ္သည္။ က်ြနု္ပ္ တို့ ကုမၸဏီ သည္ Ultrasonic နည္းပညာကိုျပည္တြင္း(ထိုင္း) တြင္သာမက ျပည္ပနိုင္ငံမ်ားကိုပါေထာက္ပံေပးေနေသာ ကုမၸဏီ တခုျဖစ္ပါသည္။ က်ြန္ုပ္တို႔၏ ရည္မွန္းခ်က္သည္ အရည္ေသြးျမင့္မ်ားေသာ ( ဥေရာပ ထုတ္) စက္ပစၥည္းမ်ားကို သင့္တင့္ေသာ ေစ်းနွုန္းျဖင့္ က်ြန္ုပ္တို႔၏ ေဖာက္သည္မ်ားကို ေထာက္ပံေပးႏိုင္ရန္ျဖစ္ပါသည္။
က်ြန္ုပ္တို႔ သည္ စက္ရံုသံုးပစၥည္းမ်ား အထူးသျဖင့္ စားေသာက္ကုန္ထုတ္လုပ္သည္စက္ရံုမ်ား၊ အလိုေလွ်ာက္စနစ္သံုး စက္မွဳလုပ္ငန္းမ်ား၊ ပလက္စတစ္ လုပ္ငန္း စက္ရံုမ်ား အထည္လုပ္ငန္း စက္ရံုမ်ား၊ အလွကုန္ထုတ္လုပ္သည့္စက္ရံုမ်ား၊ ထုပ္ပိုးမွဳ လုပ္ငန္းစက္ရံုမ်ား နွင့္ အေထြေထြ စက္မွဳလုပ္ငန္း အမ်ားစုအတြက္ လိုအပ္ေသာ စက္ရံုသံုးပစၥည္းမ်ားကိုေထာက္ပံ့ေပးေနသာ ကုမၸဏီ တစ္ခုျဖစ္သည္။

လုပ္ငန္းခြင္အတြင္း အခက္အခဲ ျဖစ္ ခဲ့ပါကလဲ on-site ၀န္ေဆာင္မွဳျဖင့္ အပိုပစၥည္းမ်ားကိုလဲ အဆင္သင့္ရရွိနိုင္ပါသည္။

မွ အေျခေနအမ်ိဳးအတြက္သင့္ေလ်ာ္ေသာ ထုုတ္ကုန္မ်ားကို က်ယ္က်ယ္ျပန္႔့ျပန္႔ ေထာက္ပံေပးလ်က္ရွိပါသည္။

DR-Sonic Engineering Co., Ltd.သည္ ၂၀၀၈ ခုနွစ္တြင္ မတည္ရင္းနီးေငြြ ဘတ္ ၁၀ သန္း ျဖင့္စတင္ဖြဲ ့စည္းခဲ့ပါသည္။DR-Sonic Engineering Co., Ltd.သည္ ေခတ္မီေသာစက္ပစၥည္းမ်ားကို သံုးစြဲသူတို့၏လုိအပ္ခ်က္အတိုင္းျပည့္မွီေအာင္ ေထာက္ပံေပးနိုင္ရန္ လုပ္ေဆာင္လ်က္ရွိပါသည္။ အရည္ေသြးျမင့္မားေသာ ထုတ္ကုန္မ်ားကို သက္သာေသာေစ်းနွဳန္းျဖင့္ သံုးစြဲသူမ်ားကို ေထာက္ပံ့နိုင္ရန္မွာ က်ြန္ုပ္တို႔၏ရည္မွန္းခ်က္ျဖစ္ပါသည္။ ကၽြန္ေတာ္တို႔မွာ အသင့္ရွိေသာ စက္ပစၥည္း နည္းပညာမ်ားႏွင့္ လူႀကီးမင္းတို႔ရဲ႕ လုပ္ငန္းခြင္ ျပႆာနာ မ်ားကို အရည္အေသြးေကာင္းမ်ားျဖင့္ေဆာင္ရြက္ေပးပါသည္

 

DR-Sonic Engineering Co., Ltd. is an Industrial Machinery / Equipments supplier that is capable of meeting all machinery demands of modern day manufacturing. Our company also offers Ultrasonic Technology in Thailand and overseas. Our aim is to provide our customers with high quality machines (manufactured in Europe) at competitive prices.
We specialize in Food & Beverage Industry, Automotive Industry, Plastic Industry, Textile Industry, Powder Industry, Medical Device Industry, Cosmetics Industry, Packaging Industry and most general Industrial Machinery.
We also provide quality on-site serving that can deal with your trouble shooting problems with spare parts readily available.
With a wide range of products offered by DR-Sonic, we can offer the most apt and suitable system for almost any application / field.

DR-Sonic Engineering Co., Ltd. was established in 2008 with registered capital of 10 Million Baht. DR-Sonic Engineering Co., Ltd. is founded to meet the demands of modern day manufacturing. Our aim is to provide our customers with High Quality Machines at competitive prices. We also provide Quality Onsite Servicing that can deal with your troubleshooting problems, with spare parts readily available.

 

CONTACT US 

Address
10, PRAWIT LAE PHUAN SOI 16 BANGCHAK, PRAKHANONG BANGKOK 10260, THAILAND
Phone
+66 2746 1869, +66 81 735 5453
E-mail
am.drsonic@gmail.com
Website
drsonic.aecgateway.com, www.drsonics.com